top of page

HEED3

HELICOPTER EMERGERCY EGREES DEVICE

HEED3_Banner_Logo.jpg
Submersible_Systems_40_years_logo_200x.png

The Helicopter Emergency Egress Device (HEED 3) is a compact, lightweight and reliable Category A device designed to increase survivability in case of an unintended submersion in water. Born out

of a need to provide US Navy helicopter pilots with a small, handheld breathing device the Heed 3 has been saving lives since 1979. Ideal for all helicopters, fixed wing aircraft, float planes, watercraft and vehicles that operate around possible water emergencies. Over 350,000 systems sold worldwide in over 40 years. Tested & approved by the US Navy.

Our Models

HEED3 175 Series

  • More than 500g lighter than competing models

  • The HEED 3 is the smallest emergency breathing device on the market

  • Simple design is easy to repair and maintain

  • Always-on design is ready to deliver air when you need it

  • Refillable from an air compressor (or SCUBA tank using optional adapter)

  • Deluxe Dial Gauge Pressure Indicator standard on every unit

  • CE approved - Tanks on units shipped to Europe are CE approved to meet current European Safety Standards required for all compressed gas cylinders and are properly CE marked

  • Made in the USA

 

Specifications

Part Number:         

Cylinder Capacity:         

Service Pressure:          

Length:                

Diameter:                

Weight:                     

Cylinder Material:          

Regulator Type:               

Pressure Relief:                

Operational Temperature:   

Duration of Air:               

Australian Certification:

SA-175-001

2 cu ft / 58 liters

3000 psi / 207 bar

9.5" / 24 cm

2.25" / 5.7 cm

1.5 lb. / .7 kg

Aluminum - Black Anodized

Single Stage

Integrated in regulator

-22°F / -30°C < +158°F / +70°C 

38 breaths*

GC 6-175260/14

HEED3 200 Series

Helicopter Emergency Egress Device (HEED)

​

The first stage reduces the high pressure within the cylinder to an intermediate pressure utilized by the second stage.

Serial Number - Both First and Second Stage Regulators are assigned serial numbers, located on the back side of each. Pressure Indicator - Dial Gauge Pressure Indicator has an easy to read, color coated display for at-a-glance pressure check in psi and bar.

​

Refill Port & Cap - Refillable from an air compressor, hand pump or full scuba tank.
Mouthpiece – High quality silicone mouthpiece.
Purge Button - Clears the regulator and empties the cylinder. Second Stage Regulator -The second stage provides air at ambient pressure and normal breathing rate through the mouthpiece. Can be used in any orientation, even upside down. On/Off Knob - Twist valve to turn the air supply on and off.

3000 PSI Aluminum Cylinder – Original manufacture date is stamped on the neck. The cylinder should be hydrostatically tested every 5 years based on this date.
VIP Sticker - Month and year of the last cylinder visual inspection, required every year when refilling at a dive shop.
Burst Disc & Plug Assembly - Protects the product in the event of over pressurization

 

Specifications

Part Number:

Cylinder Capacity: 

Water Capacity:    

Service Pressure:

Length:               

Diameter:          

Weight:               

Cylinder Material:  

Regulator Type:   

Surface Breaths:   

SA-200-003

6 cu ft / 170 liters

53 cu in / 1 liter

3000 psi / 207 bar

13.4" / 34 cm

3.2" / 8.2 cm

3.7 lb. / 1.7 kg

Aluminum - Black Anodized

Balanced Single Stage

up to 114

Our Models

HEED3 300 Series

Based upon the most popular Spare Air®, the larger cylinder provides extra air.

​

HEED 3 can be equipped with an optional 959 Nose Clip with Lanyard Combo 

  • Simple design is easy to repair and maintain

  • Always-on design is ready to deliver air when you need it

  • Refillable from an air compressor (or SCUBA tank using optional adapter)

  • Deluxe Dial Gauge Pressure Indicator standard on every unit

  • CE approved - Tanks on units shipped to Europe are CE approved to meet current European Safety Standards required for all compressed gas cylinders and are properly CE marked.

  • Made in the USA

 

Specifications

Part Number:

Cylinder Capacity:       

Water Capacity:      

Service Pressure:       

Length:                    

Diameter:                  

Weight:                      

Cylinder Material:         

Regulator Type:        

Surface Breaths:          

Australian Certification: 

SA-300-001

3 cu ft / 85 liters

30 cu in / .5 liters

3000 psi / 207 bar

13.4" / 34 cm

2.25" / 5.7 cm

2.2 lb. / 1 kg

Aluminum - Black Anodized

Balanced Single Stage

up to 57

GC 6-175220/14

bottom of page